Frequently Asked Questions

Common Questions about Industrial Electrical Solutions

What is Power Correction?

Power Factor Correction (PFC) is the process of improving a low power factor present on a power system by installing power factor correction capacitors and inductors (harmonic filters) to increase the ratio of active or usable power to total power. These capacitors and inductors are housed in an enclosure which also includes a control unit and sensors to consistently monitor the system. Capacitors and inductors are switched on and off to counteract the low power factor. This is referred to as a Power Factor Correction Unit.

What are the benefits of Power Factor Correction?

There are a number of benefits to Power Factor Correction (PFC). The most important benefit for most businesses is the cost savings. PFC will reduce electricity demand and result in lower electricity bills. There are also environmental benefits associated with Power Factor Correction, as the business is placing a lower demand on the electricity grid reducing their carbon footprint. For a full understanding of the benefits of Power Factor Correction, please check out the

‍Benefits of Power Factor Correction

Are you insured?

Electro Systems have Public Liability Cover of $20,000,000, Products Liability of $20,000,000 and Professional Indemnity Insurance of $2,000,000. Our WorkCover Queensland Accident Insurance Policy covers the full amount of our liability under the Workers’ Compensation and Rehabilitation Act 2003. Certificates of Currency are available on request.

What does Test and Tag involve?

Test and Tag refers to the process of testing equipment and involves a visual inspection, a physical test and record keeping. Firstly the piece of equipment is checked to ensure it is in good physical condition and that there is no electrical or mechanical damage. For example, knicks, cuts and abrasions to the lead or cracks, breaks, deterioration of the case. There are a series of prescribed tests to carry out to meet the required test standards. They must comply with Australian Standards AS/NZS 3760 In-service safety inspection and testing of electrical equipment. Test runs are performed on equipment such as drills and grinders to ensure they are operating correctly. If everything is OK a test tag is attached to the lead of the device. If they are not operating correctly then an “out of service” tag will be attached. Results are entered into log books which are stored at the customer’s site.

What is your safety record?

Electro Systems have an excellent safety record. Protecting our company, our staff as well as our Customers’ staff and their company assets is an important priority. We hold monthly safety meetings, tool box talks and have the support of Safety Connect Australia. This ensures we are using the best safe work practices. Safety Connect Australia provide a knowledge base of safe work practices and an audited program to monitor our history of work practices.

Why do I need safety switches?

Safety switches on power points and lighting circuits are required by law to protect you and your staff. Safety switches are earth leakage protection devices and also called RCD’s (Residual Current Device). The installation of these devices must comply with Australian Standards AS/NZS 3000 Wiring Rules and the Electricity Act 2013.

Why do we need to use an elevated work platform when an extension ladder would do the job?

Extension ladders have higher levels of risk when used at heights. Footings on a ladder can be unstable and slip. Falls from above 2 metres can inflict very serious injuries to the Electrical Worker. Elevated Work Platforms provide a stable work platform and clear access to the work area.

Why do you send two people to the job?

Electro Systems believe in training apprentices to ensure a supply of well-trained workers into the future. They are trained in the Electrical Industry to become electrical trades people with high levels of expertise. They provide a cheaper resource of labour to our customers. Sometimes they are not fully utilised on the job. When this occurs Electro Systems would not charge for their time. If they have assisted and cut down the time the trades person would have spent on the job then they are charged out at the appropriate rate.

About Electro Systems

Our Team Industries Serviced Our Projects FAQ Latest News Areas We Service

Frequently Asked Questions

Common Questions about Industrial Electrical Solutions

About Electro Systems

Get started. Get a quote today, from us.

About us

Contact us